March 11, 2024
By James Tarr
Affiliate Disclosure: This page contains affiliate links. We earn from qualifying purchases.
If you are looking for your first gun with which to start shooting action pistol competitions, whether you’re looking at USPSA, IDPA, or both, all you really need—seriously—is a reliable pistol. You don’t need a dedicated “competition” gun to shoot matches, all you need is something that works, all the time. That said, what makes a good competition gun is something with good sights and a better-than-average trigger pull. After that, it’s whatever features you want the most—aggressive texturing, an oversize magazine well, etc. What’s important is not whether other people say it’s a great gun, but whether you can shoot it well. First, I’d like to point out that these are ten of the best options for various divisions in USPSA and IDPA competition, but I am limiting my choices to factory guns. Custom-built dedicated competition pistols are always the best option, but most people don’t have the time to wait or (more likely) the money to invest. However, these out-of-the-box, competition-ready handguns will serve you well, and there is an option for every budget out there.
Walther PDP Match Walther’s PDP Match Full-Size is a purpose-built competition gun and gives you everything you need and nothing you don’t at a price that won’t cause your spouse to file for divorce. Walther’s basic PDP (Performance Duty Pistol) is a polymer-framed, striker-fired 9mm that is an improvement and modernization of the PPQ, which it replaced. It is eminently reliable and has one of the best factory trigger pulls of any striker-fired pistol out there. Every PDP is optics-ready. Any model of the PDP would serve you well in USPSA or IDPA, but the full-size Match model is built for competition. It has a longer, 5-inch barrel and the sight radius to match, with lightening cuts in the slide. It has an enhanced trigger pull, aggressive frame checkering, removable mag well, and comes with extended 20-round magazines. There are two versions of this exact pistol, one with the standard polymer frame and one with a steel frame. Except for the frame material, these two 5-inch guns are otherwise identical, and you have to decide if the recoil-absorbing properties of a metal frame is worth the jump up in price from the $1,099 of the polymer gun to the $1,899 of the SF Match. Until you’re B-class in USPSA (Expert in IDPA) or better, I think you’d be better served buying the polymer gun and using the leftover money to buy ammo, but then again, for whatever reason I’ve always shot polymer guns better than metal ones.
Advertisement
Ruger SR1911 Koenig Competition 1911 First up is the Ruger SR1911 Koenig Competition 1911 . When I reviewed this 1911 when it first came out, I did a bit of damning with faint praise, and now that I’ve had some time to reconsider, I see that it’s a much better gun than I at first thought. The first professional shooter that I can think of that started shooting 9mm at major matches was Doug Koenig. He professed a willingness to lose more points for non-center hits (shooting a “minor” caliber) for the trade-off of higher capacity and lower recoil. It took a while, but now a lot of competition shooters are running 9mm 1911 single-stacks, and the Ruger gives you everything you need and nothing you don’t at a price below what you’d pay for a true custom 1911, in either 9mm or .45 ACP. The Ruger SR1911 Competition has a stainless-steel frame and slide with black nitride accents. It has a fiber optic insert in the front sight, a fully adjustable BoMar-style rear sight, front and rear slide serrations, a checkered front strap and mainspring housing, and detachable magazine well. It has a great slide-to-frame-to-barrel fit, which is done by hand, and a crisp trigger pull. The 9mm version is $2,849. Ruger doesn’t make these all the time, so if you can find one, snap it up.
Glock 34 The Glock 34 is the granddaddy of plastic, striker-fired guns meant for competition, and it still is a far better choice than most. Glock labeled the 9mm G34 and otherwise identical .40 S&W G35 their Practical/Tactical guns, and with good reason. The G34 stretches the 4.4-inch barrel of the duty-sized G17 to 5.31-inches. This gives you a longer sight radius (if you’re using irons). For most of its life, the G34 has sported a cutout on the top of the slide—this isn’t a port but rather a weight-saving feature. This keeps the top end the same weight as the shorter G17, allowing Glock to use the same recoil system, but less reciprocating weight means less perceived recoil. The Glock has been a hugely popular design because its low bore reduces muzzle rise, so recoil is minimal in spite of its low weight—empty the G34 is just 24 ounces or so. Best of all, this model Glock replaces the standard 5.5-pound connector with a 3.5-pound connector, bringing the trigger pull down to somewhere between 4 to 6 pounds. Still not great, but it’s highly shootable, and the improved trigger systems are available everywhere. Glock mags are plentiful and cheap, and Glocks are THE standard in reliability. G34s are available in Gen 3, 4, and 5 flavors, with standard sights or optics ready. If you want a dedicated competition handgun, the G34 set the standard in USPSA’s Production and IDPA SSP divisions and is a solid choice in Carry Optics. Depending on the generation, you should be able to find this pistol for about $600, and it’s available darn near everywhere pistols are sold.
Advertisement
Dan Wesson DWX Dan Wesson’s full-size DWX is not advertised specifically as a competition handgun, but it seems well-suited to the task. This pistol pairs the trigger system of the 1911 with the barrel lockup and grip/capacity/reliability of a CZ 75. It also looks great, with red anodized grip panels and matching trigger. This all-steel pistol is fed by flush, affordable CZ P-09 19-round magazines. The frame is ergonomic, with aggressive checkering. The sights are good—a fiber optic front paired with an adjustable rear. The trigger pull is as good as you’d expect out of a 1911. It took Dan Wesson a few years to perfect this design, but it seems worth the wait. MSRP is $1,999.
Shadow Systems DR920P The Shadow Systems DR920P is changing the game when it comes to “Glock-clone-style” handguns. Shadow Systems is adding all the modern features expected in handguns to a “Glock-style” layout and reliability. The DR920P is a great out-of-the-box competition-ready offering from Shadow Systems. It features an integral compensator, suppressor-height sights, optics-ready slide and a flat-faced trigger. Compatible with Glock-style holsters, the Shadow Systems DR920P is also features an aggressively textured slide and frame, and its match-grade, spiral-fluted 4.48-inch barrel is ideal for competition use. The DR920P uses 17+1 capacity Glock-style magazines and weighs in at 21.5 ounces. With a price tag right around $1,100, the DR920P is an affordable pistol that won’t need any upgrades for competitions.
If you have any thoughts or comments on this article, we’d love to hear them. Email us at FirearmsNews@Outdoorsg.com .
