Skip to main content Skip to main content

Fix It Sticks Introduces Two New Modular Tool Kits

Fix It Sticks Introduces Two New Modular Tool Kits

Fix It Sticks, innovator of modular firearms maintenance tools and torque limiters, has introduced two new field-portable, comprehensive tool kits, the Long Range Kit and the 3 Gun Kit for long range shooters and multi-gun competitors respectively. Developed with input from competitive shooters in each discipline, both kits have an extensive array of the most useful tools, bits and torque limiters necessary to properly setup and maintain firearms for maximum accuracy and performance. These kits are capable enough to use on the bench and portable enough to use in the field.

The 3 Gun Kit has firearm specific tools and components multi-gun shooters need to keep their rifle, shotgun and handgun in top competitive condition on the range or at a match. The kit contains four of the most needed Fix It Sticks Torque Limiters to properly tighten scope rings, handguards, action screws and accessories. As well as having a wide selection of general use hex bits, The 3 Gun Kit contains firearm specific tools and bits such as a bolt scraper (AR-15 and AR-10), a Glock site tool, a 1911 Bushing Wrench, AR-15 Castle Nut Wrench and Choke Tube Wrench. Also included is a multi-section cleaning rod and the new Fix It Sticks Take-Down Ratchet T-Handle. The 3 Gun Kit includes the following:

  • Ratchet T-Handle
  • 65 Inch Lbs torque limiter
  • 45 Inch Lbs torque limiter
  • 25 Inch Lbs torque limiter
  • 15 Inch Lbs torque limiter
  • 1/2” Socket/Adapter
  • Mini Pry Bar
  • Pin Punch set
  • Bronze Scraper
  • Steel Pick
  • Cleaning Brush Bit
  • Set of two 8-32 adapters
  • Aimpoint Bit
  • .223 BCG Scraper
  • .308 BCG Scraper
  • A2 Sight Bit
  • Castle Nut Bit
  • Choke Wrench
  • 1911 Bushing Bit
  • Glock Front Sight Bit
  • Rod Set (.223-6.5-.30)
  • 24 Chrome Plated Bits
  • Magnetic Patch
  • Micro Fiber Lens Cloth
  • Soft Carrying Case

The Long Range Kit is designed to setup and maintain precision rifles anywhere at any time. Four of the Fix It Stick torque limiters are included to guarantee proper torque for action screws and scope mounts which is critical for consistency and repeatable accuracy. A set of bubble levels is on hand to eliminate canting the reticle while mounting optics. As well as the proper tools for setting up a rifle, the Long Range Kit has the components necessary to quickly maintain a precision rifle in the field including the Fix It Sticks steel cleaning rod system with brass bore protectors, a general cleaning brush, bronze scraper and lens cleaning cloth. The new Fix It Sticks Take-Down Ratchet T-Handle is included for portability and versatility. The Long Range Kit comes with the following:

  • Ratchet T-Handle
  • 65 Inch Lbs torque limiter
  • 45 Inch Lbs torque limiter
  • 25 Inch Lbs torque limiter
  • 15 Inch Lbs torque limiter
  • 1/2” Socket/Adapter
  • Mini Pry Bar
  • Pin Punch set
  • Bronze Scraper
  • Steel Pick
  • Cleaning Brush Bit
  • Set of two 8-32 adapters
  • ;Bubble Level Set
  • Rod Set (.223-6.5-.30)
  • 3/16” Extended Action Bit
  • 5/32” Extended Action Bit
  • 24 Chrome Plated Bits
  • Magnetic Patch
  • Micro Fiber Lens Cloth
  • Soft Carrying Case

The soft carrying case for both new kits features molded-in bit holders designed to hold any bit / accessory with a standard 1/4" Base (including Fix It Sticks Torque Limiters), and any 8-32 threaded component. The magnetic patch included with each kit keeps bits and small parts from being lost during use.


Like all Fix It Sticks tool kits the backbone of the system is the Fix It Sticks tool drivers and innovative torque limiters. The Fix It Sticks tool drivers work with any ¼” hex bit, are a takedown design for portability as well for using in different configurations. The preset torque limiters also use ¼” bits and tighten to the specified inch/lbs at which point they spin freely. Fix It Sticks bits and torque limiters will work with any ¼” bit driver.


The Long Range Kit and The 3 Gun Kit are also available with the new All-In-One torque driver in place of the four included torque limiters. The All-In-One torque driver can tighten fasteners anywhere between 15in/lb and 65in/lb with precise graduations laser marked at 15in/lb, 25in/lb, 35in/lb, 45in/lb, 55in/lb and 65in/lb. Both kits are now available.

  • The 3 Gun Kit: $416 P
  • The 3 Gun Kit with All-In-One torque driver: $350 MSRP
  • The PRS Kit: $434 MSRP
  • The PRS Kit with All-In-One torque driver: $368 MSRP

For more information: CLICK HERE.

GET THE NEWSLETTER Join the List and Never Miss a Thing.

Recommended Articles

Recent Videos

Magazine Cover

GET THE MAGAZINE Subscribe & Save

Digital Now Included!

SUBSCRIBE NOW

Give a Gift   |   Subscriber Services

PREVIEW OUR CURRENT ISSUE

Buy Digital Single Issues

Don't miss an issue.
Buy single digital issue for your phone or tablet.

Buy Single Digital Issue on the Firearms News App

Other Magazines

Special Interest Magazines

See All Special Interest Magazines

GET THE NEWSLETTER Join the List and Never Miss a Thing.

Get the top Firearms News stories delivered right to your inbox.

Phone Icon

Get Digital Access.

All Firearms News subscribers now have digital access to their magazine content. This means you have the option to read your magazine on most popular phones and tablets.

To get started, click the link below to visit mymagnow.com and learn how to access your digital magazine.

Get Digital Access

Not a Subscriber?
Subscribe Now